cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
327
Views
0
Helpful
1
Replies

Ringtones for other than primary line

jarogers2
Level 1
Level 1

Is there a way to give users a wider selection of ringtones on lines 2 through 8? Currently Line 1 gets all the basic selections, but Lines 2 through 8 get only only static options labeled "Ring 1, Ring 2, Ring 3, etc".

1 Accepted Solution

Accepted Solutions

Rob Huffman
Hall of Fame
Hall of Fame

Hi James.

This is most possible :)

From a super NetPro Jorge;

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddfd0b1/7#selected_message

From BC;

The process is the same as it is to add a ringtone to the primary DN, only instead of editing the file "ringlist.xml", you edit "distinctiveringlist.xml".

Instructions located here: http://www.cisco.com/en/US/customer/docs/voice_ip_comm/cucm/admin/4_1_3/ccmfeat/fsrings.html.

Hope this helps! Happy Holidays!

Rob

View solution in original post

1 Reply 1

Rob Huffman
Hall of Fame
Hall of Fame

Hi James.

This is most possible :)

From a super NetPro Jorge;

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddfd0b1/7#selected_message

From BC;

The process is the same as it is to add a ringtone to the primary DN, only instead of editing the file "ringlist.xml", you edit "distinctiveringlist.xml".

Instructions located here: http://www.cisco.com/en/US/customer/docs/voice_ip_comm/cucm/admin/4_1_3/ccmfeat/fsrings.html.

Hope this helps! Happy Holidays!

Rob

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: