route external call differently than internal call
My external calls come in via a digital PRI on my MGCP gateway. The telco sends the last 4 digits of the dialed number. So for example an external call to 123-345-6789 comes in as 6789. 6789 is a route pattern to my Meeting Place. So internal callers dial 6789 to get to it. I want to grab only the external call to 6789 and translate it to a different number. I don't want internal calls to 6789 to be translated. Is there a way to do this? I thought I could create a translation pattern and put it in a partition that is only seen in the CSS for "Call Routing information - inbound calls" but that did not work.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...