Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Route list Error with H323 Gateways

Hi I have a CUCM 8.0.3.20000 with 2 h323 gateways, one with 3 E1 PRI and the other one with 1 E1 PRI, I have a route pattern that points first to the 3E1 gateway and then the other one.

In case that all E1s on the first gateway are full, the users are hearing "your call cannot be complete as dialed ....... "

Is This a normal behavior? can i changed this ?

Thanks a lot

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Route list Error with H323 Gateways

We may need more information, but on initial reaction I would recommend looking at this global common on the IOS voice gateway.

"no dial-peer outbound status-check pots"

HTH.


Regards,
Bill

Please rate helpful posts.

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

3 REPLIES

Re: Route list Error with H323 Gateways

We may need more information, but on initial reaction I would recommend looking at this global common on the IOS voice gateway.

"no dial-peer outbound status-check pots"

HTH.


Regards,
Bill

Please rate helpful posts.

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

New Member

Re: Route list Error with H323 Gateways

Hi William

Many thanks for your answer, i gonna test it this afternoon, i will let you know.

Regards

FD

New Member

Re: Route list Error with H323 Gateways

that command and change the ios was the solution, thanks a lot.

FD

335
Views
0
Helpful
3
Replies