Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

route pattern for internal dialing

All,

Need your help. The CM adin left the company and I will have to take it over.

I just checked the route patterns, they all start with 9.@ or 9.011 or 9.1[2-9]xx[2-9].....there seemed no route patterns for internal dialing. What is I want to dial a 4 digit internal number such as 1234, how will that call be routed?

Thanks,

1 ACCEPTED SOLUTION

Accepted Solutions

Re: route pattern for internal dialing

You do not need route patterns for internal dialing. Callmanager knows about internally assigned DNs and allows calls to/from these extensions based on calling search spaces and partitions. The calling phone must have a calling search space which contains the partition of the called phone in order for the call to complete.

Hope this helps.

Brandon

1 REPLY

Re: route pattern for internal dialing

You do not need route patterns for internal dialing. Callmanager knows about internally assigned DNs and allows calls to/from these extensions based on calling search spaces and partitions. The calling phone must have a calling search space which contains the partition of the called phone in order for the call to complete.

Hope this helps.

Brandon

213
Views
0
Helpful
1
Replies