Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Route Pattern with time based

Is there a method to configure RP (Route pattern ) to block any  calls outside working hours ?

I am using CUCM 8.6

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

Re: Route Pattern with time based

Yes sure you can use RP to block calls based on time of the day. You will need to use Time of day routing to do this..

The link above shows how to configure time of day routing..

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080a7bc96.shtml

Once you have created your time periods and schedule, assign time schedules to partition and assign partition to RP.

You then create two RP as follows

RP1, in pt-OOH

under route option, you selct block this pattern

RP2, in pt-OH

select route pattern

Please rate useful posts

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
1 REPLY
VIP Super Bronze

Re: Route Pattern with time based

Yes sure you can use RP to block calls based on time of the day. You will need to use Time of day routing to do this..

The link above shows how to configure time of day routing..

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080a7bc96.shtml

Once you have created your time periods and schedule, assign time schedules to partition and assign partition to RP.

You then create two RP as follows

RP1, in pt-OOH

under route option, you selct block this pattern

RP2, in pt-OH

select route pattern

Please rate useful posts

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
342
Views
0
Helpful
1
Replies