Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Router and CUCM Gateway

Hi all

Please help with the left side of the figure

What do I need to configure routers (1 and 2) to ensure that the calls would come and go from and to the router 3

and in general need to do something between the two routers?

Please see attach

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Router and CUCM Gateway

Hello,

Yeah, you are right.Here both the gateways act on its own.No relations between them.

Thanks

Siva

Pls rate if helps you.

6 REPLIES
Cisco Employee

Router and CUCM Gateway

Hello,

Well, it depends.What gateway (h323 or mgcp or Cube) you would like to configure.How abt connectivity to R3 ? meaning is it a sip trunk ?

Can you pls put in detail ?

Thanks

Siva

New Member

Re: Router and CUCM Gateway

i connect CUCM8.6 with gateway (R2) with mgcp and configure E1 port

R3 is a GateKeeper and i want to send with H.225 GK controlled trunk

Cisco Employee

Router and CUCM Gateway

Hello,

You can go like this..

CUCM > MGCP > E1 - for calling PSTN calls.

CUCM > R3(Gatekeeper) - for calling other offices.

Use different route patterns pointing to MGCP gateway and GK.

Thanks

Siva

New Member

Re: Router and CUCM Gateway

Thanks for help, but I have not had this in view

I wanted to ask, do I have something set up between the R1 and R2?

or call automatically will be held at R1 and get the R2 and vice versa ?

New Member

Re: Router and CUCM Gateway

As you've pointed out above (CUCM> R3 (Gatekeeper) - for calling other offices.) I understand that there are no options needs betweens R1 and R2.

Am I right?

Cisco Employee

Router and CUCM Gateway

Hello,

Yeah, you are right.Here both the gateways act on its own.No relations between them.

Thanks

Siva

Pls rate if helps you.

283
Views
0
Helpful
6
Replies