Hello everyone. I am new at Cisco VOIP and i need some help.
I manage to create VoIP on my router C2911 and i have 3 IP phones. I have one voice port that is conected to my country telecom(ground line whose number iz YYYYYY). My phones have 3 digits extensions. Example 222, 333 and 444. They can call each other localy. I configured dial peer pots, and when i make call from my IP phone to my cell phone(number of cell phone: xxxxxxx) it goes through voice port, and on my cell phone is shown that the ID of the caller is YYYYYY.
Now i want to configure that when i call from my cell number YYYYYY, router "answers" and ask me what extension do i want and when i type on my cell 222, my IP phone with that extension needs to ring.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...