I recently got one of these RTMT alerts (sqlservr (95 percent) uses most of the CPU) during a time when there are little if no usage on the phone system. I checked out the event logs and there was nothing during the particular time frame of the RTMT alert, not even backups. I also checked the Call Detail Reports and saw that there was only 3 calls during that time. Any suggestions?
Dont worry about this if it is coming once in a while. However, if you are getting this alert more often check to see if dial tone is delayed when the phone goes off-hook. If you experience delayed dial tone, the high CPU load is affecting your service levels and you should open a TAC Case.
If this is happening around 2 AM everyday, it could be caused due CDR Load info CAR Database when spikes the CPU. Can u let us know when exactly does this happen. And if there is fixed time of the day when this issue occurs
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...