TotalProcessesAndThreadsExceededThresholdStart alarm(s) and 0 TotalProcessesAndThreadsExceededThresholdEnd alarm(s) received. On Wed May 20 13:44:05 CDT 2009; the last TotalProcessesAndThreadsExceededThreshold alarm generated: TotalProcessesAndThreadsExceededThresholdStart NumberOfProcesses : 151 NumberOfThreads : 1856 Reason : Total processes and threads have exceeded the maximum tasks 
We have not noticed any issues but it alerts over 3 to 4 times a minute.
I have increased the threshold for this parameter to 2100 and the alert continues now the threads is up to over 2000 and the process are over 150. This appears to have happened after we made a change to the MOH multicast maximum connections setting. Would a restart of the server be a solution?
This alert need not necessarily mean there is a stability issue or thread leak issue in the system. This alert just indicates that the number of threads has exceeded the threshold set and that we will stop updating this counter beyond this number, even if number of threads is increasing. The reason we do that is, to avoid system impact we incur to update this counter when number of threads is huge.
So if you have verified the system (and the processes listed) that there is no real thread leak you can ignore this alert. As a workaround, you may restart AC and CTI services again.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...