I have a design question popping in my mind regarding running CUCM 8.X/9X on UCS.
Let us say that I have initially configured a CUCM Publisher and Subscriber to run on a Cisco UCS server using the VMware OVA Template that allows for 2500 IP Phones.
Both CUCM servers have been installed and setup using the specs from an OVA that allows 2500 IP Phones. Later, I decide to increase the capacity of the same hosts from 2500 IP Phones to support 7500 IP Phones.
Do I need to build up new CUCM servers using an OVA Template that allows 7500 IP Phones per server or do I modify the existing CUCM VMware host settings such as increase the RAM, HDD, etc.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...