Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SCCP Admin state

I am trying to get a IOS conference bridge setup and can't seem to get it registered. One thing I noticed was when I do a "show sccp" I receive this

SCCP Admin State: DOWN

Gateway IP Address: 10.91.89.21, Port Number: 2000

IP Precedence: 5

User Masked Codec list: None

Call Manager: 10.47.3.13, Port Number: 2000

Priority: N/A, Version: 4.1, Identifier: 1

Call Manager: 10.47.3.12, Port Number: 2000

Priority: N/A, Version: 4.1, Identifier: 2

Call Manager: 10.47.3.11, Port Number: 2000

Priority: N/A, Version: 4.1, Identifier: 3

Here is my gateway config.

sccp local Loopback0

sccp ccm 10.XX.3.13 identifier 1 version 4.1

sccp ccm 10.XX.3.12 identifier 2 version 4.1

sccp ccm 10.XX.3.11 identifier 3 version 4.1

!

sccp ccm group 1

associate ccm 1 priority 1

associate ccm 2 priority 2

associate ccm 3 priority 3

associate profile 1 register CAL-CONF

switchback method immediate

!

dspfarm profile 1 conference

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

maximum sessions 3

associate application SCCP

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: SCCP Admin state

do a no sccp / sccp, confirm the device name in CUCM

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
2 REPLIES
Cisco Employee

Re: SCCP Admin state

do a no sccp / sccp, confirm the device name in CUCM

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: SCCP Admin state

Thanks Java! that was it.

1765
Views
0
Helpful
2
Replies