Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SCCP IP Phone Firmware for 4.x and 7.x

We are preparing for UCM upgrade from 4.1(3) to 7.1(3). Is it possible to load SCCP 8.1(2) load, so we don't have to upgrade the IP Phones during the upgrade process? 8.1(2) is supported in both UCM 4.1(3) and 7.1(3) but I am not sure if this will work or not.

Thanks!

2 REPLIES
Cisco Employee

Re: SCCP IP Phone Firmware for 4.x and 7.x

If there is FW available for your CCM version that is also the latest on a linux appliance you can install it with no problem, the FW is exactly the same. They way you install it is what's different.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: SCCP IP Phone Firmware for 4.x and 7.x

Rashid,

We are also looking to upgrade from 4.1 to 7.1.3. Are you staging on new devices or upgrading the current production boxes?

130
Views
0
Helpful
2
Replies