Have a CM 5.1 cluster deployed with 7941s/7961s. Server time shows correct while the phone time is offset by an hour. 7941s/7961s are running firmware version 8.2.1s (SCCP).
If I reset the phone from Callmanager, time shows up fine on the phone. If you unplug the cable on the same phone and plug it back in, time goes back by an hour.
I read some posts from this forum that 8.2.1 is supposed to have this problem fixed, but its behaviour is inconsistent. Also read that 8.2.2 should fix this. Cant find 8.2.2 firmware for download anywhere on CCO.When is the expected release date for 8.2.2 ?
Or is this is a problem that can be fixed by calling TAC and getting an ES ?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...