Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SCCP - SIP phone problem

Hi there,

Question about an communication issue between SCCP and SIP phones. We have an UCM6.x and three SCCP phones and a lot of SIP phones. The SCCP phones are 1 7960G, 1 7965G and 1 7911G. Only the 7911G phone has bi-directional audio with the sip phones. The other phones only have one way audio. So we can hear the SCCP phone talk on our SIP phone but the SIP phone is not heard on the SCCP phone. We are not in an routed environment because all is in LAN, so routing could not be the problem. We already tested with the Codec but that also does not make any difference ?

Does anybody have an idea why the 7911G is working and the other ones not.

I already updated both the 7960G and 7965G phones to the latest available firmware possible.

1 REPLY
New Member

Re: SCCP - SIP phone problem

I was looking to find some hardware differences between the 7911G and the other ones, but that also does not seem to be the issue.

Hope somebody can help soon.

223
Views
0
Helpful
1
Replies