We updated the routers config to move it to a new location. Once we brought it back up the transcoder won't register. A show sccp says failed TCP connection, but it's registering to a CME interface on the same router. I also set up a confernce bridge using the same ccm group and that registers fine.
A debug sccp error yields these three lines every second:
000037: Feb 26 14:39:51.608 CST: sccp_tls_client_instance socket inheritance failed for appl 1B19514
000038: Feb 26 14:39:51.608 CST: sccp_tls_client_instance: event 14 enqueued for prof_id 1, appl_type 2 reg_name
000039: Feb 26 14:39:51.608 CST: sym_xapp_process_ccapi_events: minor is ZERO - should be non-zero for CCAPI event
Anyone know what this means. The cert was reissued, I've unconfigured, restarted several times, etc
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...