I have a problem here and i would like your help with that.. :)
I have a Cisco 7940, and i've downloaded the 8.11 SIP firmware.I extracted the firmware an there are 5 files :
I've setup my laptop's ip address,connected the phone with a cross cable, and i am using the PumpKIN software for TFTP.So, when i try to boot it up, it takes the OS79XX file, but nothing else, and it asks for some .cnf files.
Why there are not these files to the directory that i have downloaded ?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...