Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SCCP vg224 SRST Caller ID

I have some SCCP vg224 ports registering to an SRST router for fall back but whenever the phone makes a call out the caller ID is that of the POTS lines connected to the SRST router's FXO ports. Is there anyway to change the caller ID to that of the vg224 port doing the calling?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

SCCP vg224 SRST Caller ID

If the call is going out of the  POTS line then you cannot change it, this is no different than calling from IP phone. FXO lines do not allow you to send any different ANI as only a single number is tied to them.

HTH,

Chris

3 REPLIES
Hall of Fame Super Silver

SCCP vg224 SRST Caller ID

If the call is going out of the  POTS line then you cannot change it, this is no different than calling from IP phone. FXO lines do not allow you to send any different ANI as only a single number is tied to them.

HTH,

Chris

New Member

SCCP vg224 SRST Caller ID

Yeah.. That's what I thought. Thanks for the quick response. If we had a PRI then this would be doable, correct?

Hall of Fame Super Silver

SCCP vg224 SRST Caller ID

Correct, PRI, SIP trunk FXS/DID lines would allow you to do this.

HTH,

Chris

94
Views
5
Helpful
3
Replies
CreatePlease to create content