Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SCCP11.9-3-1SR2-1S firmware and Data Vlan problem on 7911 phones

Hi

We have updated the firmware of 7911 phones to SCCP11.9-3-1SR2-1S. The case is after update the phones, many user connected to Juniper with LDP switchs have lost the conection on their PC. I mean te phone works but the PC connected to the phone not but it has link.

We have downgrade the phone to previus version (SCCP11.9-0-2SR1S) and their are working now.

I haven't found any bug in this firmware but may be anyone knows what could be the problem.

Mean while we are going to make test with SCCP11.9-3-1SR1-1S version

Thank you.

Best Regards

8 REPLIES
New Member

SCCP11.9-3-1SR2-1S firmware and Data Vlan problem on 7911 phones

Hi,

Are you facing same issue with other phone models when upgrading the firmware ?

Thanks

Vigeesh

SCCP11.9-3-1SR2-1S firmware and Data Vlan problem on 7911 phones

Hi,

what is your CCM version ?

HTH

Anas

please rate all helpful posts

VIP Purple

SCCP11.9-3-1SR2-1S firmware and Data Vlan problem on 7911 phones

Hi Martin,

I was trying to look into bugs related to this phone firmware but did not find any.

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cuipph/7900_series/firmware/9_3_1SR2/release_notes/P790_BK_R345967C_00_rn-9_3_1sr2-7900-series.html

Do u have cisco switch just to troubleshoot?

regds,

aman

New Member

SCCP11.9-3-1SR2-1S firmware and Data Vlan problem on 7911 phones

Thank you for the answers.

We just have had this problem with 7911. We have other models as 7962, 7965, etc with SR2 but they work well.

We had 2500 7911 phones already updated in differents branchs, but only arround 50 of them started to fail. They are connected to a Juniper Switch, this is the only difference with the others.

Were are performaning some test with SR1 and its looks work fine.

New Member

Re: SCCP11.9-3-1SR2-1S firmware and Data Vlan problem on 7911 ph

Unfortunally the SR1 has the same issue.

Is very strange. The users with the problem are  connected to a Juniper x3200. This switch is a distribution switch.  There is a Cisco 2960 as access swtich connected to the Juniper. The  users in the cisco switch work well.

Also, we have others users connected to others x3200  and work fine. The only difference is these Juniper Switches work as  Access swiches and the swiches with the problem work as distribution  switches conected by fiber to the core and with a Cisco 2960 Access  switch conected to them.

Anyone knows which is the most  lower firmware we can use for 7911 phones to work in CUCM 9.1 version?  becaue all of this is in order  to upgrade the CUCM to 7.1 to 9.1 and  9.1 have 9.3.1SR1 firmware.

Thank you.

VIP Purple

Re: SCCP11.9-3-1SR2-1S firmware and Data Vlan problem on 7911 ph

New Member

Re: SCCP11.9-3-1SR2-1S firmware and Data Vlan problem on 7911 ph

Yes, we have used that firmware.

No, SR1 has the problem as well.

We though could be a problem with the lldp-med of the Juniper and the CDP of the Cisco. But we can not configure lldp-med in Cisco because i has a Lite image. 

VIP Purple

Re: SCCP11.9-3-1SR2-1S firmware and Data Vlan problem on 7911 ph

Hi Waldo,

Suggest opening case with Juniper.

regds,

aman

637
Views
0
Helpful
8
Replies