Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SDI trace

Hi

How to enable SDI trace? Is it just the CCM trace? I can find SDL trace, but not SDI. Thanks

4 REPLIES
New Member

Re: SDI trace

You should use Trace Configuration on the Serviceability page. By default, when you choose Trace->Configuration it appears SDI trace.

You can modify it how you want (only errors, detailed trace etc.)

When you select SDL trace on the right corner appear SDI trace and vice verse.

please rate, if it helpfule

Cisco Employee

Re: SDI trace

Set Up Cisco CallManager Traces for Cisco Technical Support

http://www.cisco.com/en/US/customer/products/sw/voicesw/ps556/products_tech_note09186a0080094e89.shtml

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: SDI trace

Thanks guys. I actually have been using CCM trace for many years, but just not sure this is SDI. What does SDI mean?

Cisco Employee

Re: SDI trace

Your basic definitions are;

* SDI - System Diagnostic Interface - This is the trace interface used in CUCM for diagnostic output.

* SDL - Signal Distribution Layer - The is a trace interface which reveals interactions of the different state machines in CUCM. Of course the output of SDL traces are often very low level.

Regards,

Michael.

1582
Views
0
Helpful
4
Replies