We have a Cisco3945-cme-srst router that has 200 seat licenses , do we still need to include RTU(Right To Use License) on individual IP Phone?
Total number of phones is 188
The phones are: cp-7945g qty (25)
cp-6911-c-k9 qty (162)
Even with the newest ISR-G2 CME licensing scheme, Phone Licenses are Paper based RTU licenses (Right to Use).
Right to Use Feature licenses are not enforced. The "legal" expectation is that a license will be purchased for each phone but this is still strictly "honor" based
Here is a clip that speaks to this question;
Prerequisites for Configuring Cisco Unified CME
Base Cisco Unified CME feature license and phone user licenses that entitle you to use Cisco Unified CME are **purchased.
From this CME doc;
ISR 29xx, 39xx
Thanks for your support.
We don’t want to include the RTU licenses on the phone, mainly because of cost implication.
Hope the solution and implementation will still work well without the RTU licenses on the phones?
As Rob stated, it's a "legal" issue. However, if you ever want to switch to a CUCM environment you can transfer your RTU licenses for DLUs.
Just my $.02.
I wanted to place order for the unified communication manager 7.1 with media convergence server (MCS7825I4-K9-CMC2).
But i later realized that this MCS server (MCS7825I4-K9-CMC2) is end of life but surprisingly i still find it on dynamic configuration tool!!!
Though, the replacement for this is ==> MCS7835I3-K9-CMC2 and cost $12,000 GPL which is quite more than my budget.
Is there any server apart from (MCS7835I3-K9-CMC2) that can still do the work of (MCS7825I4-K9-CMC2) and has the same price range like $7,000 - $8,000 GPL?
The reason you still see it available in DCT is because it's still shipping
Last Ship Date:
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
March 28, 2012
I don't see any other options available other than moving to the 7835 you listed.
Don't forget that the 7825I4 is supported until almost 2017 (December 31, 2016)
which is pretty well the standard length of support for one of these boxes
Please remember to tag your threads and help support "Teachers without Borders"
Can be please send me the Cisco equivalent for the polycom product below:
Polycom HDX Media Center 7000-720 2PT HDX 7200-23130-102,HDX Media Center Pedestal with 2-42"1080p LCD displays,2 Soundbars, EagleEye HD camera mount cable bundle, order casters separately(Maintenance Contract Required)
Polycom caster kit for packaged solutions, Polycom HDX Media Centers only, single and dual displays. Set of 4, 2 locking for use in front ,4"
Polycom HDX Ceiling Microphone- White "primary'; includes 2'(60cm) drop cable, electronics interface, wall plate with 10'(3m) & 50' (15m) plenum cable for HDX systems
Polycom Premier, one year, HDX Media Center 7000 series with two displays
i want to place order for an ip phone(cp-7911g) of 250 unit and i have media convergence server (mcs 7800 series).
how many number of device license unit(Lic-cm-dl-10=) will be required?
how many dlu will each phone(cp-7911g) take?