01-28-2009 07:10 AM - edited 03-15-2019 03:49 PM
Hi to all,
A my customer want that when the second incoming call a ephone it does not show the call on screen but simply advise the caller with a busy tone.
The configuration it's very simply I paste follow some line:
--------------------------
num-exp 333333.. 1..
!
ephone-dn 3 dual-line
number 122
pickup-group 234
label User - 122
description User - 122
name Segreteria - 122
call-forward busy 999
call-forward noan 999 timeout 30
no huntstop
night-service bell
!
ephone 3
mac-address XXXX.XXXX.XXXX
after-hours exempt
username "122" password 122
paging-dn 111
type 7970
button 1:3
-------------------------
He want that when the second caller call 33333322 the ephone does not ring and obtain busy tone.
I know it a very stupid question, but how can I do that?
Thank you very much.
01-28-2009 07:20 AM
Hi Augusto,
Not a stupid question at all my friend :)
Because the DN's are set up as dual-line you need to add the following (huntstop channel command). Have a look;
The following example creates an ephone-dn with the number 103 in dual-line mode. The no huntstop command allows calls to continue to hunt to other ephone-dns if this one is busy or does not answer. The huntstop channel command disables call hunting to the second channel of this ephone-dn if the first channel is busy or does not answer.
Router(config)# ephone-dn 10 dual-line
Router(config-ephone-dn)# number 103
Router(config-ephone-dn)# no huntstop
Router(config-ephone-dn)# huntstop channel
Router(config-ephone-dn)# exit
Hope this helps!
Rob
01-28-2009 07:33 AM
Hi Rob,
in this way the second call is routed to the voicemail (call-forward busy 999)... it's ok!
To obtain the unvailable tone it's enought remove "call-forward busy 999" right?
Thank you very much
Augusto
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: