We only had one TFTP server in the DHCP scopes. The scopes were deleted and recreated with 3 TFTP servers, for redundancy. I thought that I would just have to reboot the phones for it to see more than on TFTP server. I reset and also unplugged the ethernet cable, but I still only have one TFTP server listed. I had to manually go into my phone and change the alternate tftp to YES from No and now I see a second TFTP server. Please tell me that I don't manually have to do this on every phone. How can I get these other TFTP servers to be an option for the phones in case the first one is down when it is needed?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...