02-26-2014 04:10 AM - edited 03-16-2019 09:55 PM
Dear Sir,
I've gave authorization to handle the IP Telephony in our company.
But I've noticed that user can access easily to call National & International.
Is there any configuration that you can put a password or Security on all of my Cisco Telephones before they dial?
Model (7945 & 9951)
Exp: For 7945
ephone-dn 1 dual-line
number 202
pickup-call any-group
pickup-group 12
label Rodny
name Rodny
corlist incoming EMPInt
!
!
ephone-dn 2 dual-line
number 203
pickup-call any-group
pickup-group 11
label Don Don
name Don Don
corlist incoming EMPInt
!
!
ephone-dn 3 dual-line
number 204
label Saeed Dammam
name Saeed Dammam
corlist incoming EMPInt
!
!
ephone-dn 4 dual-line
number 226
label pki2
name pki2
corlist incoming EMPNat
!
For 9951:
voice register dn 17
number 200
pickup-call any-group
pickup-group 11
name Derjem
shared-line max-calls 4
label Derjem
mwi
!
voice register dn 18
number 201
pickup-call any-group
pickup-group 12
name Arife
shared-line max-calls 4
label Arife
mwi
Thanks,
Michael
02-26-2014 05:38 AM
Adjust cor lists appropriately or implement FACs.
Chris
Sent from Cisco Technical Support iPhone App
02-26-2014 05:45 AM
Chris,
Is possible to configure secruity password for phones registerd to cucm.
02-26-2014 09:30 PM
Hi Cris,
How to configure that? because the user want to have an access for International call.
and he want to have a security for other users.
Thanks,
02-26-2014 05:49 AM
Yes, FACs are available on CME and CUCM, your config was drone CME.
Chris
Sent from Cisco Technical Support iPhone App
02-27-2014 06:54 AM
Is this for CUCM or CME as your config was for CME yet you mentioned CUCM?
Chris
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: