Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Silver

Select POTS dial peer based on calling party number

Hi,

Does any one know if it is possible on a H323 Gateway to select a specific BRI interface (pots dial-peer) based on the calling number?

Meaning the IP phone is 1234 and i want this phone to use a specific BRI.

Thanks,

Bye,

JH

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Re: Select POTS dial peer based on calling party number

JH,

Yes, this is possible. Take a look at the following link for a sample configuration.

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801c0a88.shtml

Hope this helps.

Brandon

2 REPLIES
VIP Purple

Re: Select POTS dial peer based on calling party number

JH,

Yes, this is possible. Take a look at the following link for a sample configuration.

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801c0a88.shtml

Hope this helps.

Brandon

Silver

Re: Select POTS dial peer based on calling party number

Thanks Brandon, exactly what I wanted

Jan

149
Views
0
Helpful
2
Replies
CreatePlease to create content