Re: sending 999 calls via the FXO in both CUCM and SRST mode
Thanks for that J!
yea sounds like that but I have seen somewhere, that you can have an MGCP gateaway where you can control different voice ports by different protocols i.e. assign an FXO to an H323 control, an E1 card controlled by SIP or MGCP.
Coz I want, as mentioned before, a phone even registered with CM use the local 999 dail-peer to be sent out via the FXO.
These are the paths to get to each CCX logs through CLI. They may be helpful if you are having issues accessing RTMT or downloading logs through it.
If you want to download them you have to prefix "file get " and you can add one of the options (re...