Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Serial Number on MCS servers

Hi all,

I've got 9 MCS servers on various sites that I need to find the serial numbers of.

I've go CM6.1 running on 7 of them and Unity 5 on Win 2k3 on the 2 others.

Any ideas how I can do this remotely? I can't seem to get them to share the info with me!!

LH

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Serial Number on MCS servers

3 REPLIES

Re: Serial Number on MCS servers

Re: Serial Number on MCS servers

Hi there Adrian,

That's worked a charm for the Windows servers, but when I run the snmp commands on the ccm cli I get no response, but the server promises me it's running snmp:-

admin:utils snmp walk 2c public 127.0.0.1 .1.3.6.1.4.1.232.2.2.2.1.0

This command may temporarily impact CPU performance.

Continue (y/n)?y

Failed :

Timeout: No Response from 127.0.0.1

Executed command unsuccessfully

admin:

admin:

admin:utils snmp test

Service Manager is running

Test SNMP Trap starts with Local Host Name, Specify a Remote Sever Name to test Remote Syslog

Message from syslogd@publisher at Thu Apr 2 16:15:03 2009 ...

publisher local7 0 : 1: Apr 02 15:15:03.8 UTC : %CCM_CALLMANAGER-TESTALARMCATALOG-0-TestAlarmEmergency: Testing EMERGENCY_ALARM App ID:Cisco CallManager Cluster ID: Node ID:publisher

Message from syslogd@127.0.0.1 at Thu Apr 2 16:15:03 2009 ...

127.0.0.1 local7 0 1: Apr 02 15:15:03.8 UTC : %CCM_CALLMANAGER-TESTALARMCATALOG-0-TestAlarmEmergency: Testing EMERGENCY_ALARM App ID:Cisco CallManager Cluster ID: Node ID:publisher

TestAlarmInformational sent [Returncode=0]

TestAlarmEmergency sent [Returncode=0]

TestAlarmAlert sent [returncode=0]

TestAlarmCritical sent [Returncode=0]

TestAlarmDebug sent [Returncode=0]

TestAlarmNotice sent [Returncode=0]

TestAlarmWarning sent [Returncode=0]

TestAlarmError sent [Returncode=0]

admin:

Any thoughts?

LH

Cisco Employee

Re: Serial Number on MCS servers

Hi Leigh

If you have a MIB Browser application you could use this SNMP OID - .1.3.6.1.4.1.232.2.2.2.1 cpqSiSysSerialNum - Description: "The serial number of the system unit."

I hope this helps.

Regards,

Michael

673
Views
0
Helpful
3
Replies
CreatePlease login to create content