Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

server hardware for CUCM 6 upwards

Guys,

I plan to buy a server to start with my Voice lab. I have the below spec for the sever and would like to know if CUCM will run on it with the VMware.

I plan to upgrade this servers with 8GB of RAM.

Could you guys please let me know if CUCM will run on both of the below.

1) HP ProLiant ML115 G5 AMD Opteron 1354 Quad Core / 1GB / 160GB / DVD Optical / 1 Year Warranty / Tower Server

2) HP ProLiant ML110 G5 – Server – micro tower – 4U – 1-way – 1 x Xeon 3065 / 2.33 GHz – RAM 1 GB – HDD 1 x 250 GB – DVD±RW (+R double layer) – Gigabit Ethernet -

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: server hardware for CUCM 6 upwards

Yes, CUCM will install on these servers using VMware for use in a lab environment. Neither server will be supported by Cisco for use in a production environment. Virtualization support for a production environment will begin with CUCM 8 and will initially be supported only on UCS.

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html

Hope this helps.

Brandon

6 REPLIES

Re: server hardware for CUCM 6 upwards

Yes, CUCM will install on these servers using VMware for use in a lab environment. Neither server will be supported by Cisco for use in a production environment. Virtualization support for a production environment will begin with CUCM 8 and will initially be supported only on UCS.

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html

Hope this helps.

Brandon

New Member

Re: server hardware for CUCM 6 upwards

Thanks Brandon. I shall go ahead and order one of these.This is purely for LAB purpose.

New Member

Re: server hardware for CUCM 6 upwards

Hi Brandon,

I now have the new HP Proliant AMD opteron Quad Core server with 1TB HD and 8Gig RAM.

I am trying to install CUCM 6.0.1 on a Virtual machine and get this error "Could not find kernal image:linux" Does this mean my image is corrupted? Where can i source an image for CUCM7.0 or CUCM7.1. Could you please help. I have this server since a week and unable to progress further.

Thanks

Mohammed

Re: server hardware for CUCM 6 upwards

Yes, this could be caused by a corrupt image. I have seen this problem mentioned with other CUCM versions. Would recommend obtaining another DVD.

Brandon

New Member

Re: server hardware for CUCM 6 upwards

Hi Brandon,

I have access to download software from cisco.com, Can I download CUCM software from cisco's website for LAB purpose?

I have been trying to download it but the options I get are "upgrade assistance, locale installer" nowhere I find a proper CUCM image to download?

Thanks

Mohammed

Re: server hardware for CUCM 6 upwards

No, you will not be able to download the full install DVD image. You'll need to obtain another disk.

Brandon

824
Views
0
Helpful
6
Replies