We just upgraded from Callmanager 4.x to CUCM 8.6.2. One minor difference is that before you could host simple phone services on the cisco server itself. I don't see how to do that now, is there a way to? I'd like to create an idle image URL for our older 7940/7960 phones... but I don't want to have to run a separate server just for that.
The idle URL will remain configured, but the actual file will not be present on the server. In 5.x and later, you do not have the ability to upload files to the CUCM web server and must use your own server to host things such as custom services and idle URLs.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...