Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

service clid_authen_collect anable in CME 7.0

I have enable PIN option as is shown but sometimes after dialing the phone number the prompts which ask the user and PIN is not listen and the call goes through.

how can I check the reason the user and PIN is not asked?

application

service clid_authen_collect

param uid-len 3

param pin-len 3

username 369 password 7 091F1850

dial-peer voice 202 pots

corlist outgoing Cell

description Cellular Calls

destination-pattern 9044..........

direct-inward-dial

port 0/2/0:1

prefix 044

dial-peer voice 1202 voip

description Cellular Calls con PIN

service clid_authen_collect

destination-pattern 9044..........

session target ipv4:10.10.10.1

incoming called-number 9044..........

dtmf-relay h245-alphanumeric

codec g711ulaw

no vad

1 REPLY
Silver

Re: service clid_authen_collect anable in CME 7.0

Check the bug:

CSCsb50678: Authorization not done at GK for All Level Security

1018
Views
0
Helpful
1
Replies
CreatePlease to create content