Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Set 7940 SRST reference via web or DHCP?

On a site with temporary loss of connectivity to UCM, is it possible to configure an SRST reference on the phone without call manager. Either on the phone itself, set it via DHCP or through web interface?

Although the router is configured for SRST, the phone have lost their SRST reference and obviously don't have access to UCM to re-configure.

1 REPLY
Green

Set 7940 SRST reference via web or DHCP?

Hi,

Not to my knowledge.

You need to configure the SRST parameter via the Device pool on CUCM

When the 7940 loads its config file it picks this up from the "call Manager List" as part of the config file from the TFTP server.

Regards

Alex.

Regards, Alex. Please rate useful posts.
231
Views
0
Helpful
1
Replies
CreatePlease to create content