Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Set on-/off-net call classification within a H.323 GW?

Hi,
I have searched for a possibility to set on-net or off-net call classification within a H.323 gateway. Reason being that the GW in question has a Q.SIG connection to a PBX, that houses old DECT phones, and also has a connection to the PSTN. What I'd like to achieve is that calls to/from the PBX is classified as on-net and calls to/from the PSTN is classified as off-net.

If this is not possible I’ll have to setup the GW as both H.323 and MGCP and do the classification for on-/off-net in the UCM. But I’d like to avoid that if possible.

Best regards

Roger Kallberg

Please remember to rate helpful responses and identify helpful or correct answers.
Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Super Bronze

Re: Set on-/off-net call classification within a H.323 GW?

Hi

The On-net/off-net classification only exists as an admin field in CallManager - it's not signaled out anywhere.

So you'll have to go with the MGCP/H.323 option I guess.

Regards

Aaron

Please rate helpful posts..

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
1 REPLY
Super Bronze

Re: Set on-/off-net call classification within a H.323 GW?

Hi

The On-net/off-net classification only exists as an admin field in CallManager - it's not signaled out anywhere.

So you'll have to go with the MGCP/H.323 option I guess.

Regards

Aaron

Please rate helpful posts..

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
751
Views
0
Helpful
1
Replies