05-18-2007 01:06 AM - edited 03-14-2019 09:34 PM
Hi, I have seperate CSS for seperate group of IPT and phone for remote location. I have no problem to set up forward call to an extension in the same block/CSS or to an external number. I can not forward the call to an ext that connected to other CSS/partition and remote site. The local ext in different DID blocks share the same MRL media resource list. The remote IPT uses a different MRL. Please help to find the cause and resolution.
Au Ray
05-18-2007 05:31 AM
Hi Au Ray,
The problem here is the CSS. For the Call Forward CSS choose one that is the same as one that allows calls to connect from IP Phones on the two sites. Look at the CSS that is applied to a phone device that can call between the 2 sites and apply this CSS to the Call Forward All - CSS and you should be good to go!
Hope this helps!
Rob
05-20-2007 10:11 PM
Rob, your info is very helpful. I resolved the problem.
Au Ray
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide