Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Setting 3560 for QOS and Queues

Brain cramp...

what is the command that places all the commands at the beginning of the config for a 3560 that seems to define all the mls qos input and output queues?  Specifically, I am talking about this stuff:

mls qos srr-queue input bandwidth 90 10
mls qos srr-queue input threshold 1 8 16
mls qos srr-queue input threshold 2 34 66
mls qos srr-queue input buffers 67 33
mls qos srr-queue input cos-map queue 1 threshold 2  1
mls qos srr-queue input cos-map queue 1 threshold 3  0
mls qos srr-queue input cos-map queue 2 threshold 1  2
mls qos srr-queue input cos-map queue 2 threshold 2  4 6 7
mls qos srr-queue input cos-map queue 2 threshold 3  3 5
mls qos srr-queue input dscp-map queue 1 threshold 2  9 10 11 12 13 14 15
mls qos srr-queue input dscp-map queue 1 threshold 3  0 1 2 3 4 5 6 7
mls qos srr-queue input dscp-map queue 1 threshold 3  32
mls qos srr-queue input dscp-map queue 2 threshold 1  16 17 18 19 20 21 22 23
mls qos srr-queue input dscp-map queue 2 threshold 2  33 34 35 36 37 38 39 48
mls qos srr-queue input dscp-map queue 2 threshold 2  49 50 51 52 53 54 55 56
mls qos srr-queue input dscp-map queue 2 threshold 2  57 58 59 60 61 62 63
mls qos srr-queue input dscp-map queue 2 threshold 3  24 25 26 27 28 29 30 31
mls qos srr-queue input dscp-map queue 2 threshold 3  40 41 42 43 44 45 46 47
mls qos srr-queue output cos-map queue 1 threshold 3  5
mls qos srr-queue output cos-map queue 2 threshold 3  3 6 7
mls qos srr-queue output cos-map queue 3 threshold 3  2 4
mls qos srr-queue output cos-map queue 4 threshold 2  1
mls qos srr-queue output cos-map queue 4 threshold 3  0

mls qos srr-queue output dscp-map queue 1 threshold 3  40 41 42 43 44 45 46 47
mls qos srr-queue output dscp-map queue 2 threshold 3  24 25 26 27 28 29 30 31
mls qos srr-queue output dscp-map queue 2 threshold 3  48 49 50 51 52 53 54 55
mls qos srr-queue output dscp-map queue 2 threshold 3  56 57 58 59 60 61 62 63
mls qos srr-queue output dscp-map queue 3 threshold 3  16 17 18 19 20 21 22 23
mls qos srr-queue output dscp-map queue 3 threshold 3  32 33 34 35 36 37 38 39
mls qos srr-queue output dscp-map queue 4 threshold 1  8
mls qos srr-queue output dscp-map queue 4 threshold 2  9 10 11 12 13 14 15
mls qos srr-queue output dscp-map queue 4 threshold 3  0 1 2 3 4 5 6 7
mls qos queue-set output 1 threshold 1 138 138 92 138
mls qos queue-set output 1 threshold 2 138 138 92 400
mls qos queue-set output 1 threshold 3 36 77 100 318
mls qos queue-set output 1 threshold 4 20 50 67 400
mls qos queue-set output 2 threshold 1 149 149 100 149
mls qos queue-set output 2 threshold 2 118 118 100 235
mls qos queue-set output 2 threshold 3 41 68 100 272
mls qos queue-set output 2 threshold 4 42 72 100 242
mls qos queue-set output 1 buffers 10 10 26 54
mls qos queue-set output 2 buffers 16 6 17 61
mls qos

It's been a while since I had to do this from scratch, digging through Network Warrior, but hoping someone can get me going a little quicker!

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Setting 3560 for QOS and Queues

I believe you may be thinking about auto-qos. See the following link for a

detail breakdown of how to use auto-qos and the configs that are

automatically created by the macro command.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/1

2.2_50_se/configuration/guide/swqos.html#wp1231112

HTH.

Regards,

Bill

Please remember to rate helpful posts.

On 7/15/10 8:27 AM, "townofnewmarket"

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

2 REPLIES

Re: Setting 3560 for QOS and Queues

I believe you may be thinking about auto-qos. See the following link for a

detail breakdown of how to use auto-qos and the configs that are

automatically created by the macro command.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/1

2.2_50_se/configuration/guide/swqos.html#wp1231112

HTH.

Regards,

Bill

Please remember to rate helpful posts.

On 7/15/10 8:27 AM, "townofnewmarket"

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

New Member

Re: Setting 3560 for QOS and Queues

Thanks, that was it!  Oh so easy, but for some reason it was just escaping me.

177
Views
0
Helpful
2
Replies
CreatePlease to create content