Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Setting Up a primary/slave CM 7.0 server

Hi,

I have to prepare my self to do a implementation at a customer who has two CM 7.x servers.

I have to make one of them as primary in Site A and the other one as secondary in Site B.

To do this I have read the CIPT 1 & 2 manuals, but didn't found anything to help me.

Now I run both CM 7.x in VMware and are fresh instalation.

Can u guys guide me how to do that???

Thanks in advance,

Michael

3 REPLIES
Cisco Employee

Re: Setting Up a primary/slave CM 7.0 server

Easy task, configure CUCM groups

Cisco Unified Communications Manager Group Configuration

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmcfg/b02cmgrp.html

Once you have the right groups assign them to Device Pools and use them for the phones.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Setting Up a primary/slave CM 7.0 server

Thanks for you're quick reply.

When I installed the second CM 7.x, when I was prompt to select if is the first node in network, I choosed that is not the first node. Is ok like this, because I don't have web access to this server.

Cisco Employee

Re: Setting Up a primary/slave CM 7.0 server

That's a whole different thing, that's to define if you're installing a PUB or a SUB.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
112
Views
0
Helpful
3
Replies
CreatePlease to create content