cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2983
Views
0
Helpful
1
Replies

Setting up SIP on a Cisco 7960

ekm170286
Level 1
Level 1

Hi

I have had now tried for some time to get some Cisco 7960 to work.

So far i have managed to get them to find and load files from the Tftp, although it doesn't seem like they can find the SIP"MAC-adress".cnf and load this.

Also the phones write up some error messages in the status when i look on the phones, after they have booted.

The files look like this:

SIPDefault.cnf

image_version: P0S3-8-12-00

# Extension to dial for voicemail

messages_uri: “999”

# Proxy Server

proxy1_address: “10.1.1.173”

proxy2_address: “”

proxy3_address: “”

proxy4_address: “”

proxy5_address: “”

proxy6_address: “”

proxy1_port: 5060

proxy2_port: 5060

proxy3_port: 5060

proxy4_port: 5060

proxy5_port: 5060

proxy6_port: 5060

proxy_register: 1

timer_register_expires: 600

preferred_codec: g711ulaw

tos_media: 5

dtmf_inband: 1

dtmf_outofband: avt

dtmf_db_level: 3

timer_t1: 500

timer_t2: 4000

sip_retx: 10

sip_invite_retx: 6

timer_invite_expires: 180

dial_template: dialplan

tftp_cfg_dir: “”

sntp_server: “”

sntp_mode: directedbroadcast

time_zone: EST

dst_offset: 1

dst_start_month: April

dst_start_day: “”

dst_start_day_of_week: Sun

dst_start_week_of_month: 1

dst_start_time: 02

dst_stop_month: Oct

dst_stop_day: “”

dst_stop_day_of_week: Sunday

dst_stop_week_of_month: 8

dst_stop_time: 2

dst_auto_adjust: 1

time_format_24hr: 1

dnd_control: 0

callerid_blocking: 0

anonymous_call_block: 0

dtmf_avt_payload: 101

sync: 1

proxy_backup: “10.1.1.173”

proxy_backup_port: 5060

proxy_emergency: “10.1.1.173”

proxy_emergency_port: 5060

enable_vad: 0

nat_enable: 0

nat_address: “”

voip_control_port: 5060

start_media_port: 16384

end_media_port: 32766

nat_received_processing: 0

outbound_proxy: “10.1.1.173”

outbound_proxy_port: 5060

cnf_join_enable : 1

semi_attended_transfer: 1

telnet_level: 1

services_url: “”

directory_url: “”

logo_url: “”

http_proxy_addr: “”

http_proxy_port: 80

dyn_dns_addr_1: “”

dyn_dns_addr_2: “”

dyn_tftp_addr: “”

remote_party_id: 0

call_hold_ringback: 0

stutter_msg_waiting: 0

call_stats: 0

SIP"MAC-Adress".cnf

phone_label: “IBBE”

line1_name: “201”

line1_shortname: “201”

line1_displayname: “201”

line1_authname: “201”

line1_password: “123456abc”

xmlDefault.cnf.xml

<Default>

<callManagerGroup>

<members>

<member priority="0">

<callManager>

<ports>

<ethernetPhonePort>2000</ethernetPhonePort>

<mgcpPorts>

<listen>2427</listen>

<keepAlive>2428</keepAlive>

</mgcpPorts>

</ports>

<processNodeName></processNodeName>

</callManager>

</member>

</members>

</callManagerGroup>

<loadInformation8 model="IP Phone 7960">P0S3-8-12-00</loadInformation8>

<authenticationURL></authenticationURL>

<directoryURL></directoryURL>

<idleURL></idleURL>

<informationURL></informationURL>

<messagesURL></messagesURL>

<servicesURL></servicesURL>

</Default

OS79XX.TXT

P0S3-8-12-00

********************************

And the errors on the phones are:

E600 REG send failure:

REGISTER

W350 invalid proxy_backup

W351 invalid proxy_emergency

W310 6 Error(s) Parsing:

SIPDefault.cnf

W220 TFTP Error: Not found IP

SIP"MAC-adress".cnf

W250 TFTP Error: Not found

dialplan.xml

***********************************************

I use pumpkin Tftp and i have also noticed that when looking for the SIP"MAC-adress".cnf it requests the file with some wierd signs in front of the file name like ||SIP"MAC-adress".cnf

anyone up for helping out?

1 Reply 1

asafayan
Level 4
Level 4

I have a very similar issue.  I have a CME router configured as follows:

voice register global

mode cme

source-address 192.168.70.237 port 5060

max-dn 2

max-pool 2

load 7960-7940 P0S3-07-5-00

authenticate register

time-format 24

date-format D/M/Y

tftp-path flash:

create profile sync 0001675596328227

voice register dn  1

number 73860

name BR2 Phone 1

voice register template  1

dialplan 1

softkeys connected  Endcall Hold Trnsfer

voice register dialplan  1

type 7940-7960-others

pattern 1 5....

voice register pool  1

id mac 000A.41F9.790E

type 7960

number 1 dn 1

template 1

dtmf-relay sip-notify

username 73860 password cisco

codec g711ulaw

My phone connects to CME but doesn't register.  I see a little X next to the phone icon on the phone display and my STATUS log on the phone reads:

********************************

E600 REG send failure:

REGISTER

W350 invalid proxy_backup

W351 invalid proxy_emergency

W310 12 Error(s) Parsing:

SIPDefault.cnf

W320 5 Errors(s) Parsing:

SIP000A41F9790E.cnf

***********************************************

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: