Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

settings locked issue

Hi everyone

i have got cisco 7925 wireless ip phone.When i want to enter some menus,a warning appears on the screen "settings locked".I can overcome this by typing **# buttons.Can i disable that warning and enter every munu freely without entering **#      

Thanks...

1 ACCEPTED SOLUTION

Accepted Solutions

Re: settings locked issue

In the device configuration for the 7925 under the 'Product Specific Configuration Layout' you will see the following option 'Unlock-Settings Sequence (**#)' If you set this to disabled, the users won't have to enter this key sequence to manipulate the settings.

This parameter determines if a "**#" (star-star-pound) key sequence is required for write-access to the phone's settings menu. A value of 'Enabled' requires the user to enter **# first before making changes to the settings menu. If the value is 'Disabled', the user is allowed to make modifications to the settings menu without having to enter the unlock key sequence. This is a required field.

Default:  Enabled

Thanks,

Adam

Please rate if helpful


1 REPLY

Re: settings locked issue

In the device configuration for the 7925 under the 'Product Specific Configuration Layout' you will see the following option 'Unlock-Settings Sequence (**#)' If you set this to disabled, the users won't have to enter this key sequence to manipulate the settings.

This parameter determines if a "**#" (star-star-pound) key sequence is required for write-access to the phone's settings menu. A value of 'Enabled' requires the user to enter **# first before making changes to the settings menu. If the value is 'Disabled', the user is allowed to make modifications to the settings menu without having to enter the unlock key sequence. This is a required field.

Default:  Enabled

Thanks,

Adam

Please rate if helpful


13486
Views
0
Helpful
1
Replies
CreatePlease to create content