Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Setup total 4 extensions with 3 FXO Ports.

What is the best way to add x533 which share both external incoming and outgoing call with x502 FXO port 0/0/2? My main goal is phone x533 can make external calls to outside and share the same number as (234)456-7890. Please see below for my current configuration.

Thanks in advance!

Phone (234)567-8900 to ext500 port 0/0/0
Phone (234)678-9000 to ext501 port 0/0/1
Phone (234)456-7890 to ext502 port 0/0/2

Add ext533

--------------------------------------------

voice-port 0/0/0
description line 2345678900
caller-id enable
connection plar opx 500
trunk-group FXO1                       

voice-port 0/0/1
description line 2346789000
caller-id enable
connection plar opx 501
trunk-group FXO2

voice-port 0/0/2
description line 2344567890
caller-id enable
connection plar opx 502
trunk-group FXO3
----------------------------------------------

Ext x500

# dial-peer voice 9 pots
# description *** For outgoing 9 Traffic to PSTN ***
# destination-pattern 1……….
# tone ringback alert-no-PI
# forward-digits 10
# answer-address 500
# trunkgroup FXO1                         

# dial-peer voice 10 pots
# description *** For 7 digit local calls ***
# destination-pattern [2-9]……
# tone ringback alert-no-PI
# forward-digits 7
# answer-address 500
# trunkgroup FXO1

# dial-peer voice 11 pots
# description *** For 911 Calls ***
# destination-pattern 911
# tone ringback alert-no-PI
# forward-digits 3
# answer-address 500
# trunkgroup FXO1

# dial-peer voice 12 pots
# description *** For 011 International Calls ***
# destination-pattern 011T
# no digit-strip
# tone ringback alert-no-PI
# answer-address 500
# trunkgroup FXO1
--------------------------------------------------
Ext x501

# dial-peer voice 13 pots
# description *** For outgoing 9 Traffic to PSTN ***
# destination-pattern 1……….
# tone ringback alert-no-PI
# forward-digits 10
# answer-address 501
# trunkgroup FXO2                        

# dial-peer voice 14 pots
# description *** For 7 digit local calls ***
# destination-pattern [2-9]……
# tone ringback alert-no-PI
# forward-digits 7
# answer-address 501
# trunkgroup FXO2

# dial-peer voice 15 pots
# description *** For 911 Calls ***
# destination-pattern 911
# tone ringback alert-no-PI
# forward-digits 3
# answer-address 501
# trunkgroup FXO2

# dial-peer voice 16 pots
# description *** For 011 International Calls ***
# destination-pattern 011T
# no digit-strip
# tone ringback alert-no-PI
# answer-address 501
# trunkgroup FXO2
----------------------------------------------------
Ext x502

# dial-peer voice 17 pots
# description *** For outgoing 9 Traffic to PSTN ***
# destination-pattern 1……….
# tone ringback alert-no-PI
# forward-digits 10
# answer-address 502
# trunkgroup FXO3                       

# dial-peer voice 18 pots
# description *** For 7 digit local calls ***
# destination-pattern [2-9]……
# tone ringback alert-no-PI
# forward-digits 7
# answer-address 502
# trunkgroup FXO3

# dial-peer voice 19 pots
# description *** For 911 Calls ***
# destination-pattern 911
# tone ringback alert-no-PI
# forward-digits 3
# answer-address 502
# trunkgroup FXO3

# dial-peer voice 20 pots
# description *** For 011 International Calls ***
# destination-pattern 011T
# no digit-strip
# tone ringback alert-no-PI
# answer-address 502
# trunkgroup FXO3
--------------------------------------------------------

dial-peer voice 1000 voip
description *** CUCM Peer ***
destination-pattern 5..
Voice-class codec 1
Voice-class h323 1
Session target ipv4: 10.0.0.2
dtmf-relay h245-signal h245-alphanumeric
ip qos dscp cs3 signaling
no vad

1 REPLY
VIP Gold

For incoming calls you need

For incoming calls you need to send all calls to hunt pilot (e.g. 555) as below and then assign both extension 502 & 533 to this hunt pilot.

voice-port 0/0/2
description line 2344567890
caller-id enable
connection plar 555
trunk-group FXO3

for outgoing calls, you can modify the answer address.

Hope this helps you !!!

Suresh

26
Views
5
Helpful
1
Replies