06-11-2009 04:30 AM - edited 03-15-2019 06:28 PM
Hi,
can any body advise on any issues with shared line appearance on UCM version 7.0.2.
regards
Ian.
06-11-2009 04:36 AM
Hi Ian,
Make sure the second phone is in the same Partition as the first phone and you shouldn't receive this error.
Cheers!
Rob
06-11-2009 06:56 AM
Let me guess, you're trying to configure shared line on primary line?
Shared Line Restrictions
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmsys/a03dn.html#wpxref37374
Do not configure shared-line appearances on the primary lines of the phones; for example, if two phones have a shared-line appearance, only one of the phones should have the primary line configured as shared (the other phone should have the secondary line configured as shared).
HTH
java
if this helps, please rate
06-11-2009 01:26 PM
Java,
Thanks for the update. Ideally I wanted to config shared line appearance on Line 2 of both phones and be able to make use of the CFA softkey. However It appears that I can only achieve this on Line 1 as the CFA key is not available on Line 2.
Ian.
06-11-2009 05:59 PM
Indeed, CFA on phone only works on Primary line.
You can use CCMUser to set CFA for any other line
HTH
java
if this helps, please rate
06-11-2009 11:55 PM
Java,
Thanks for the confirmation.
Ian.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: