Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Shared line with SCCP phone and a h323 client

I have a Cisco 827-4v router that I want to integrate into UCM6. I also have a 7940 that I would like to have use the same directory number on it. Since the 827 only supports h323, how can I setup a shared line so both the 7940 and a FXS rings on the 827 so both phones ring?

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
Green

Re: Shared line with SCCP phone and a h323 client

Not possible to do it so far since Device are different and we cannot internally extend the call to 2 devices....BUT thats when Mobile Connect comes into play.

You can configure your H323 as Remote Destination using Mobility Manager 1.X or CUCM 6.X.

1 REPLY
Green

Re: Shared line with SCCP phone and a h323 client

Not possible to do it so far since Device are different and we cannot internally extend the call to 2 devices....BUT thats when Mobile Connect comes into play.

You can configure your H323 as Remote Destination using Mobility Manager 1.X or CUCM 6.X.

95
Views
0
Helpful
1
Replies
CreatePlease to create content