Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Shared Primary lines for UC500

I'm having an issue that the UC500 will not allow a user to share there first line, it will not let me setup there first line with a number that is already in use, I can do it for the second line but not the first. Reason, customer has 7971 phone and wants IPCOM with exact line setting, I can do it from CUE Admin page but not Cisco Configuration Assistant. When I set this up in CUE Admin page then come back in the Configuration Assistant is will not let me let me save any voice changes without changing the shared first line.

Make sense? Any thoughts?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Shared Primary lines for UC500

yes, that is WAD (working as designed)

shared lines are only supported on 2nd line on different devices, 1st line is always primary line and cannot be used on more than 1 device using same DN and partition

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
1 REPLY
Cisco Employee

Re: Shared Primary lines for UC500

yes, that is WAD (working as designed)

shared lines are only supported on 2nd line on different devices, 1st line is always primary line and cannot be used on more than 1 device using same DN and partition

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
157
Views
0
Helpful
1
Replies