Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

show ccm "backup ready continues to go down"

Issue here is that when I issue the command show ccm, my backup which is the publisher, goes back and forth between backup ready and down. I have multiple gateways that are running the same IOS and the issues doe not seem to be occurring there.

I looked at traces on the publisher and this is what I see.

02/04/2008 06:48:08.455 CCM|MGCPBhHandler 192.168.3.1 - internal ERROR wait_SdlConnectionInd - mMGCPBhGWInfo not clean on last TCP close!!!|<CLID::StandAloneCluster><NID::192.168.2.20><CT::0,0,0,0.0><IP::><DEV::>

I do not know exactly what this trace is telling me. The ip that the trace is referencing is the gateway in question.

The below is the output from the debug ccm-manager events. It looks as if the connection is opening and closing again

*Feb 4 15:01:34.643: cmapp_host_fsm: Processing event CONN_OPEN for host 1 (192.168.

2.20) in state STANDBY_OPENING

*Feb 4 15:01:34.643: cmapp_stop_host_tmr: for host 1 (192.168.2.20)

*Feb 4 15:01:34.643: cmapp_host_fsm: New state STANDBY_READY for host 1 (192.168.2.2

0)

*Feb 4 15:01:34.643: cmapp_mgr_process_event: Host 1 (192.168.2.20) is standby ready

*Feb 4 15:01:34.643: cmapp_mgr_check_hostlist: Active host is 0 (192.168.2.21)

*Feb 4 15:01:34.651: cmapp_host_fsm: Processing event CONN_CLOSED for host 1 (192.16

8.2.20) in state STANDBY_READY

*Feb 4 15:01:34.651: cmapp_start_host_tmr: Host 1 (192.168.2.20), tmr 0

*Feb 4 15:01:34.651: cmapp_open_new_link: Open link for [1]:192.168.2.20

*Feb 4 15:01:34.651: cmbh_open_tcp_link: Using MGCP bound IP addr 192.168.3.1

*Feb 4 15:01:34.651: cmbh_open_tcp_link: Opening TCP link with Rem IP 192.168.2.20,

Local IP 192.168.3.1, port 2428

*Feb 4 15:01:34.651: cmapp_open_new_link: Open initiated OK: Host 1 (192.168.2.20),

session_id=461CC274

*Feb 4 15:01:34.651: cmapp_host_fsm: New state STANDBY_OPENING for host 1 (192.168.2.20

1 REPLY

Re: show ccm "backup ready continues to go down"

Well it seems to have been resolved. I just restarted the ccm service on the publisher from the control center. Service seems to be steady now and not bouncing back and forth between down/backup ready. Not sure why that happened though.

143
Views
0
Helpful
1
Replies
CreatePlease login to create content