cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
428
Views
0
Helpful
1
Replies

Siemens Hipath 5000 (E1-PRI) and 2851-CCME

rsefer
Level 1
Level 1

I want to connect

2851-CCME

to

Siemens Hipath 5000 by (E1-PRI)

Is there any problem with Qsig - Standart Signalling

THANKS

1 Accepted Solution

Accepted Solutions

paolo bevilacqua
Hall of Fame
Hall of Fame

According to this document;

http://cisco.com/application/pdf/en/us/guest/products/ps261/c1237/ccmigration_09186a00808f8b31.pdf

calls couldn't be transferred, and some more limitations.

This can have changed in the meanwhile, anyway.

Hope this helps, please rate post if it does!

View solution in original post

1 Reply 1

paolo bevilacqua
Hall of Fame
Hall of Fame

According to this document;

http://cisco.com/application/pdf/en/us/guest/products/ps261/c1237/ccmigration_09186a00808f8b31.pdf

calls couldn't be transferred, and some more limitations.

This can have changed in the meanwhile, anyway.

Hope this helps, please rate post if it does!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: