Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Siemens Hipath 5000 (E1-PRI) and 2851-CCME

I want to connect

2851-CCME

to

Siemens Hipath 5000 by (E1-PRI)

Is there any problem with Qsig - Standart Signalling

THANKS

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Siemens Hipath 5000 (E1-PRI) and 2851-CCME

According to this document;

http://cisco.com/application/pdf/en/us/guest/products/ps261/c1237/ccmigration_09186a00808f8b31.pdf

calls couldn't be transferred, and some more limitations.

This can have changed in the meanwhile, anyway.

Hope this helps, please rate post if it does!

1 REPLY
Hall of Fame Super Gold

Re: Siemens Hipath 5000 (E1-PRI) and 2851-CCME

According to this document;

http://cisco.com/application/pdf/en/us/guest/products/ps261/c1237/ccmigration_09186a00808f8b31.pdf

calls couldn't be transferred, and some more limitations.

This can have changed in the meanwhile, anyway.

Hope this helps, please rate post if it does!

267
Views
0
Helpful
1
Replies
CreatePlease login to create content