Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

signalization debugging

Hi, Im troubleshooting signalization between CCM 4.2 and cisco voice GW (3825). I assume that there is problem in codecs but I cannot find any type of debugging on GW router which can show me what codec were offered for this call from CCM. I tried these debugs and I dont see it.

AnnexG:

AnnexG Event Messages debugging is on

H.225:

H.225 Event Messages debugging is on

H.225 Q931 IE Details debugging is on

H.245:

H.245 Event Messages debugging is on

can somebody give me clue?

Thanks a lot.

3 REPLIES
Cisco Employee

Re: signalization debugging

are you using H323????

i would rather user a debug voip ccapi inout than those to see the capabilities

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: signalization debugging

yes, I use H323, I tried debug you wrote here, but still dont see codecs which are offered...

Cisco Employee

Re: signalization debugging

Hi Thomas,

Try 'debug h245 asn', which will show what capabilities the parties exchange. Here is a sample output. From the gateway's perspective, what is offered would be in an incoming Terminal Capabilities Set message. Within that message, look for the capabilitytable section for the list of codecs offered.

BR2#deb h245 asn

H.245 ASN1 Messages debugging is on

BR2#

BR2#sh deb

H.245:

H.245 ASN1 Messages debugging is on

Aug 7 16:25:02.109: H245 MSC INCOMING PDU ::=

value MultimediaSystemControlMessage ::= request : terminalCapabilitySet :

{

}

capabilityTable

{

{

capabilityTableEntryNumber 1

capability receiveAudioCapability : g722-64k : 60

},

{

capabilityTableEntryNumber 2

capability receiveAndTransmitUserInputCapability : dtmf : NULL

},

{

capabilityTableEntryNumber 3

capability receiveAndTransmitUserInputCapability : basicString : NULL

},

{

capabilityTableEntryNumber 44

capability receiveAndTransmitUserInputCapability : hookflash : NULL

}

Hope this heps.

Regards,

Michael.

275
Views
0
Helpful
3
Replies