Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

silence suppression with a SIP Trunk

We need to avoid RTP noise confort packages in our CCM 6.0 network in order to be able to record conversations (It's a issue of the recording application used).

In the service parameters of the Cisco CallManager we have used the following parameters:

Silence suppression: False

Silence suppression with gateway: False

Strip G.729 Annex B: True

We wanted to use G.729 without Annex B and avoid the noise comfort RTP frames. But with this configuration a SIP PSTN Gateway sends to the Cisco phones noise comfort RTP frames (in the other direction there aren't these frames).

I want to ask if there is a method CCM to force in the SIP/SDP negotation with the gateway to not use these frames. Or if this problem could be a local issue of the gateway configuration.

Thanks,

Christian

352
Views
0
Helpful
0
Replies