SimClient (6.2.3) is a PC-based bulk IP phone simulation tool, optimized for load-testing Cisco CallManagers. With SimClient calls can be simulated as a large number of phones. Calls can be made between SimClient phones, to physical phones, or in this case CallGen directory numbers (DNs). SimClient also provides streaming support through Real-Time Transport Protocol (RTP) which was used to provide accurate testing of voice calls on the network. The Cisco BCS Verified Designs testing incorporated both CallGen and SimClient to test the Integrated Services Router under call load using Busy Hour Call Completions (BHCC) as the test metric.
IntroductionCUCM Routing RulesDial String implementation PolicyCUCM Routing LogicSIP URI Call Routing Analysis+++ Case Study: 1 ++++++ Case Study: 2 +++Conclusion
Over the last few months, I have had the privilege of working on SI...
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...