if no CSS assigned then I supposed that you have it as None, correct? if this is our case then you can only call DN's that are not assigned to any partition, in other words set to none. CSS None can only call to None Partition.
So from what I understand you have the DN A and DN B assigned to a partition other than None so in that case you can NOT call B if you have the None CSS.
I may be wrong, and I probably am, but I was thinking that if you didnt assign a CSS, it would be assigned to the "default", which had access to all CSS. Im not sure why I think this, and I probably need to rethink it, but for some reason, I thought this. Anyone else?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...