Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Simultanous ringing on Four different extensions on CME

Hi,

My customer wants that when they get call on main number, that should be ringing on 4 different extensions same time. If anybody knows how to do that, could you please share how to do it.

Thanks

4 REPLIES
New Member

Re: Simultanous ringing on Four different extensions on CME

Hello,

"Parallel Hunt Groups" feature would help you. However, CME 4.3 is required for this. See link below: http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmecover.html#wp1145800

Re: Simultanous ringing on Four different extensions on CME

Hi,

Could you please let us know what version of CME you are using?

Regards

Wilson Samuel

New Member

Re: Simultanous ringing on Four different extensions on CME

Right now I am using 4.1 but I will upgrade to 4.3 or 7.0.

Thanks.

Hall of Fame Super Gold

Re: Simultanous ringing on Four different extensions on CME

You can do it with 4.1 using shared lines. However if you expect multiple calls into that DN, there is a special "chained overlay" configuration that you must do,

In CME 7.x you also have octo-lines DN for shared lines that avoid doing the chained/overlay referenced above,

Please remember to rate useful posts with the scrollbox below.

143
Views
5
Helpful
4
Replies
CreatePlease login to create content