08-12-2014 02:24 AM - last edited on 03-25-2019 08:30 PM by ciscomoderator
Hi guys,
I tried to set up the snr with sip uri, at first try, I did not assign partition with sip route pattern and did not assign any CSS on remote desitnation profile. And it worked.
When I tried to assign partition to sip route pattern and CSS (includes the partition assigned to sip route pattern) on remote destination profile. SNR stopped working.
From the log I can see that CUCM knows about the uir for mobility destination but it did not send it to the trunk. Can anyone please have a look and advise? Thanks
Cheers
Jim
08-12-2014 05:58 PM
can anyone have a look at it pls? Thanks
08-12-2014 06:42 PM
I have done two debugs for working and non-working calls.
For the working call:
allowed to call [User1@contractor.home.com]
getLineRingSetting:
retVal=4.getLineRingSetting:
retVal=4.getLineRingSetting:
retVal=4.
for the non-working one:
allowed to call [User1@contractor.home.com]
Can anyone tell me why? Thanks
04-02-2021 05:07 AM
Hello team,
I have the same problem :
"DbMobility IMS Match: no matching ims record exists for remote destination"
I checked the RDP against DNA and the problem is always the same
04-02-2021 11:10 PM
Does the RDP reroute CSS have visibility of the partition where the SIP route patterns are in?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: