Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SIP / 2821

Hi,

I have set up an complete test environnement for SIP, and I wan't to try to implement it.

But, I have looked around here, and google some times (perhaps with the wrong keywords), and I haven't found a documentation on how to proceed.

Is some one there who know where I can find this kind of docs ?

3 REPLIES

Re: SIP / 2821

What's the environment? CUBE with CUCM, SIP trunk to CME, SIP CME, etc?

Example for CUCM / CUBE:

http://www.cisco.com/en/US/products/sw/voicesw/ps5640/products_configuration_example09186a00808ead0f.shtml

SIP trunk with CME:

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_example09186a00808f9666.shtml

SIP CME:

voice service voip

sip

registrar server

voice register global

mode cme

source-address 1.1.1.1 port 5060

max-dn X

max-pool X

voice register dn 1

number 1000

voice register pool 1

id mac XXXX.XXXX.XXXX

type

number 1 dn 1

username X password X

hth,

nick

New Member

Re: SIP / 2821

I just want to use SIP client on PC with the router.

That's why I haven't found something because we have to specifid an MAC address for that...

I'm reading your 2 links now, and return with my question later !

Re: SIP / 2821

That would be SIP CME then. Technically 3rd party SIP phones aren't suppported with CME but you should be able to get them to register. I haven't played with any of the PC ones, so I don't know whether you can specify a MAC or not on them. You may need to change the command to 'id ip' or something like that.

-nick

139
Views
0
Helpful
3
Replies
CreatePlease to create content